Frequently asked questions
SPK-ZEBRONICS BLUETOOTH TROLLEY SPEAKER (THUMP 100)
How to connect with ZEB-THUMP 100 through wireless BT mode?
.Power ON the speaker, as it enters BT mode by default. Scan for nearby devices on the phone's BT menu. Click on the ZEB-THUMP 100 name and pair with it.
Q What are the different modes in the speaker?
.BT Wireless / SD card / USB / FM Mode / AUX.
How to tune FM channels?
.Switch the speaker to FM mode. Press the Play / Pause button once to scan the FM channels. Once the scanning is done, the speaker will start playing from first saved channel. To change the channels, use the NEXT / PREV buttons.
Q What are the different LED indicators?
.“RED” LED glowing - Charging “RED” LED OFF - Full Charge “BLUE” LED blinks - BT Discover Mode. “BLUE” LED stays constant - Speaker is connected to a device
What is the operating range of the ZEB-THUMP 100 in BT mode?
8-10 meters (without any obstacles).
How to decrease/increase the volume level?
Press and hold the Prev. / Next button to Decrease / Increase the volume level respectively. The volume can also be controlled using the volume adjustment knob.
What is the maximum capacity of USB / SD card that ZEB-THUMP 100 can support?
32GB
Does the speaker have built-in mic for call function?
No.
How to use USB / micro SD card?
Once the USB / micro SD card is inserted into the respective slot, it will detect the USB / micro SD card and automatically start playing the songs from it.
How to control the Mic Volume of the speaker?
The mic volume can be controlled by rotating the "MIC VOL" knob on the speaker once a Mic is connected.
How to use the TWS function?
TWS function requires 2 nos. of ZEB-THUMP 100 speakers. After entering wireless BT mode on both the speakers, long press the “TWS” button on any one of the speakers. You would hear a distinct tune indicating that both the speakers are paired together with “TWS” indication. Open the mobile's BT menu and scan for ZEB-THUMP 100 to pair with it.
What is the charging voltage?
Connect 5V DC input cable to the speaker and connect the other end of the cable to a 5V DC adapter.
Didn't find an answer? We're happy to help.