SPK - ZEBRONICS PORTABLE BLUETOOTH TROLLY SPEAKER (VIBE)

To connect the speaker to BT mode, scan for nearby BT devices in your device. Tap on “ZEB-VIBE” to connect.

Insert the USB Drive/mSD Card into the speaker. The speaker will detect the USB Drive/mSD Card and the audio files from the drive will be played automatically.

Switch the speaker to FM. In FM Mode, long press the Play/Pause Key to scan available FM channels. Once scanning is done, the speaker will start playing the first scanned channel.

Turn on both ZEB-VIBE speakers and select BT Input Mode on both the speakers. Long press the TWS button for 3 seconds on any one of the speakers. You will hear a tone which indicates the TWS mode is activated between both speakers. Open BT Settings on your device and search for BT name “ZEB-VIBE” then tap to connect on it.

To record a voice, first plug-in a USB/mSD card into the speaker which will act as a storage device. Press the REC key on the remote to start/stop recording. Once the song or voice is recorded through the Mic, press the REC. PLAY key to play the recorded file. Note: The speaker can record in Mic input.

Charging Indication : Red LED Flashing Full Charging Indication : Red LED Glows

To Play or Pause a Track in USB, mSD, BT Mode: Single press the Play/Pause/Scan button.

Decrease Volume: Single press the Previous button.

Go to the Previous Track or Channel: Long press the Previous button.

Increase Volume: Single press the Next button.

Go to the Next Track or Channel: Long press the Next button.

Change Between Available Input Modes: Single press the Mode button.

Enable TWS Mode: Double press the Mode button.

Change Between LED Modes: Long press the Mode button.