Frequently asked questions
SPK-BTRUCF ZEB PORTABLE TOWER DJ SPEAKER (ROXOR PRO)
How to turn the device on or off?
When connected to AC power supply: Use the power button on the panel or the remote control to start up the device.
When not connected to AC power supply: Long press the power button on the control panel to power on. To power off, long press the power button again.
How to adjust the EQ settings?
To toggle between EQ modes: Long press the EQ button for 2 seconds.
To enter MIC, Treble, Bass setting mode: Short press the EQ button. Use the volume knob to adjust MIC VOL, MIC TONE, MIC ECHO, MIC REVE, BASS, and TREBLE levels.
What are the different Breathing LED lights?
To switch LED modes: Double short press the Breathing LED light button to cycle through the following modes: LED Mode 1: Top to bottom bouncing LED depending on the music. LED Mode 2: Bottom to top bouncing LED depending on the music. LED Mode 3: Top & bottom to center bouncing LED depending on the music. LED Mode 4: Colorful LED pattern.
How to pair two ZEB-ROXOR PRO speakers using TWS mode?
Step 1: Ensure both speakers are in Bluetooth (BT) mode. You will see a blue blinking LED indicator when they are in BT mode.
Step 2: On the master speaker (which should be connected to a BT device and playing audio), double short press the PAIR button. The background light will start blinking, indicating the speaker is entering TWS mode.
Step 3: On the secondary speaker (do not connect it to a BT device), short press the PAIR button once. The background light on the PAIR button will flash, indicating that the secondary speaker is attempting to pair with the master speaker. Once the TWS connection is successful, the PAIR button’s background light will remain ON.
Step 4: To unpair the TWS connection, turn off both speakers.
Didn't find an answer? We're happy to help.