SPK- KJSPK1 ZEBRONICS DJ SPEAKER (SLAM)

The modes available are BT ,USB, mSD, AUX, MIC IN x 2, GT IN.

The charging indication is RED LED indicates the product is charging and once fully charged the RED LED will go off.

To use the BT mode you change the speaker to BT mode and it will show ZEB-SLAM in your required device to connect.

To use AUX mode you can directly connect 3.5mm cable to your speaker and connect the other end of the cable to your required device.

To use TWS connectivity turn on both the speaker (ZEB-SLAM) and switch the speaker to BT mode and press and hold the Mode button for 3-5 seconds in any one speaker to initiate TWS pairing(After few seconds both the speakers will get connected successfully).

Insert the USB/mSD in your speaker and it will automatically detect the and play songs.

Note: The USB/mSD is the max supported is 32GB.

To turn off and change LED indication you can press and hold LED indication button in speaker or even in remote to change and to turn it off.

You can directly connect your wired MIC and Guitar in the required port and it should be in 6.3mm.You can also both wireless and wired Mic at the same time.