SPK- ZEB TSPK 102 ZEBRONICS PORTABLE BLUETOOTH SPEAKER (STUDIO X ONE)

Turn on the speaker; you will hear an indication tone confirming BT mode. Enable Bluetooth on your phone or tablet and search for nearby devices. Find and select “ZEB-STUDIO X ONE” from the list of available Bluetooth devices. Tap to connect.

Turn on the speaker. Insert your micro SD card or USB drive into the corresponding ports on the speaker. The speaker will automatically detect and start playing the MP3 files from the inserted card/drive.Use the Prev/Next buttons to navigate through the media. Adjust the volume using the Master Volume Control Knob. Note: The micro SD card or USB drive should be in FAT32 Format and under 32GB.

Short pressSwitch, the LED light effect.

The Control knob is there to control the music volume.

ZEB-STUDIO X ONE comes with 2 in 1 supported port for XLR/TRS, after connection need to increase the Mic and guitar volume as per the requirement.

Connect headphones or active speakers to the 3.5 mm monitor port to hear the audio. The audio will travel to other connected devices. If you are need audio on ZEB-STUDIO X ONE need to long press MIC EQ button.

.First need to connect type-C cable from speaker to laptop/Mobile, after that need to open built-in recording application to record. -Live volume, primarily intended for microphone volume regulation during recording.

The speakers have an audio recording function, allowing you to record directly onto a USB drive or micro SD card (FAT32 format). Single press the rec/play button to start record and to stop, and long press to hear the recording file.

TWS function requires 2 nos. Of ZEB-STUDIO X ONE After entering wireless BT mode on both the speakers in blinking mode, after that need to press TWS button press one of the speakers to initiate TWS pairing (It's an M button long press).

Need to connect to the devices end. For pairing need to long press the PAIR button given on the speaker. Blue light start to blink rapidly, once constant means connected.

To use other external speaker, use a AUX cable and connect the cable to Line out port and the other end of the cable to external speaker aux port.

To use AUX connection the aux cable should be connected to Line in port and it will automatically change to AUX mode.