Frequently asked questions
SPK- PARTY FYRE 100 ZEBRONICS PORTABLE BLUETOOTH SPEAKER (USPK 102)
What audio input modes are available on the ZEB PARTY FYRE 100?
The available playback modes are Bluetooth (BT v5.3), USB, AUX, and FM radio.
How to control or turn off the LED lights on the ZEB PARTY FYRE 100?
Short-press the RGB LED button to cycle through the different lighting modes. Continuing to press the button past the final configuration will turn the LED indicators off completely.
How to adjust the microphone echo on the ZEB PARTY FYRE 100?
Long-press the M (Mode) button until you hear an audible beep, indicating that the speaker has entered microphone echo adjustment mode.
How to turn the Bass Boost mode on or off on the ZEB PARTY FYRE 100?
Short-press the dedicated BASS button on the control panel to toggle the bass mode on or off.
How to use USB and AUX modes on the ZEB PARTY FYRE 100?
To use USB mode, insert a compatible USB flash drive (up to 32GB) containing MP3 files into the slot. The speaker will automatically detect and play the audio. For AUX mode, connect your audio source using a 3.5mm AUX cable. If the speaker does not automatically switch inputs, press the Mode button to cycle to your target selection manually.
Where is the charging indicator located on the ZEB PARTY FYRE 100?
The LED charging indicator is located on the top control panel directly above the power button. A solid RED light indicates charging, and the light turns off once the device is fully charged.
How to set up and use the FM radio on the ZEB PARTY FYRE 100?
Short-press the M (Mode) button until the speaker enters FM mode. To scan for channels, connect a Type-C cable to the charging port to serve as an antenna , then short-press the Play/Pause button and wait a few seconds for the scan to complete. After scanning, navigate between saved channels using the Previous and Next buttons.
How to pair two ZEB PARTY FYRE 100 speakers together using TWS?
Power on both speakers and switch them to Bluetooth (wireless) mode. Press and hold the BASS button on either speaker for 2 seconds to initiate TWS pairing. Once paired successfully after a few seconds, locate and select "ZEB-PARTY FYRE 100" from your mobile device's Bluetooth menu to connect. To exit TWS mode, press and hold the BASS button again for 2 seconds.
Didn't find an answer? We're happy to help.